Multi 3630/3620 IDS Safety
ba77045d02 03/2020 7
2.2 Safe operation
2.2.1 Authorized use
Authorized use of the meter in operation with OxiTop
®
-IDS measuring heads is
exclusively the pressure measurement with OxiTop
®
-IDS measuring heads in
a laboratory.
Only the operation and running of the meter according to the instructions and
technical specifications given in this operating manual is authorized (see
chapter 16 T
ECHNICAL DATA).
Any other use is considered unauthorized.
2.2.2 Requirements for safe operation
Note the following points for safe operation:
• The meter may only be operated according to the authorized use specified
above.
• The meter may only be supplied with power by the energy sources
mentioned in this operating manual.
• The meter may only be operated under the environmental conditions
mentioned in this operating manual.
• The meter may only be opened if this is explicitly described in this operating
manual (example: Inserting the batteries).
2.2.3 Unauthorized use
The meter must not be put into operation if:
• it is visibly damaged (e.g. after being transported)
• it was stored under adverse conditions for a lengthy period of time (storing
conditions, see chapter 16 T
ECHNICAL DATA).
To Next Page
Loading...
Need help?
General
