Yaber K3 - Maintenance Tips; Care of Projector

21
7.Maintenance Tips
7.1. Care of Projector
Please use the device correctly:
Do not block the air inlets/outlets to avoid damage to internal electronics due to
improper cooling.
Do not point the lens directly at your eyes, as the strong light from the projector may
hurt the eyes.
Do not clean the lens directly with paper, cloth, or other cleaning tools to avoid lens
damage.
Do not clean the product with chemical reagents, detergents, or any liquids to avoid
corrosion of the circuit board by rainwater or mineral-laden moist liquids.
Keep the device and its components and accessories out of reach of children. Ensure
the device is used in a dry and well-ventilated environment.
Do not store the device in overly hot or cold places, as extreme temperatures can
shorten the lifespan of
electronic devices.
Do not place the device in any heating equipment (such as dryers and microwaves)
to dry.
Do not forcefully squeeze the device or place obstacles on top of or behind it to avoid
damage.
Do not throw, hit, or shake the device violently to avoid damaging internal circuit
boards.
Do not attempt to disassemble and reassemble the device yourself. If any issues arise,
contact Yaber after-sales service.