Yaesu FT-252 - Belt Clip Installation; Removal

FT-252 OperaTing Manual 7
Belt Clip Installation / Removal
Installation of Accessories

To install the Belt Clip:
Align the Belt Clip to the groove
above the Battery compartment, then
press the Belt Clip downward until it
locks in place with a “Click”.

To remove the Belt Clip:
Press the Belt Clip tab away from the
transceiver to unlock the Belt Clip,
then slide the Belt Clip up-ward to re-
move it.
Belt Clip Tab
honbun_130313.indd 7 2013/03/13 19:47:38