Yamaha CL Series System Design Guide

15
For CL/QL consoles, the default setting is to use DANTE 48k as the clock Master. This is the best
setting for most systems.
Latency settings can be adjusted, depending on the number of network switches positioned between
the devices, and the initial value is 1.0msec. The latency value can be changed by either Dante
Controller or the Dante Setup screen of CL/QL consoles. Lower latencies will be useful in smaller
live performance systems. It would be very unusual to require a latency higher than 1.0msec.

Yamaha CL Series Specifications

General

Dante Network	Yes
Touch Screen	Yes
Type	Digital Mixing Console
Control Surface	Yes
Mixing Channels	CL5: 72, CL3: 64, CL1: 48
Local I/O	CL5: 8 in / 8 out, CL3: 8 in / 8 out, CL1: 8 in / 8 out
USB Recording	Yes
EQ	4-band parametric EQ per channel
Effects	Yes
DAW Control	Yes
Word Clock	Yes
Input Channels	CL5: 72, CL3: 64, CL1: 48
Output Channels	CL5: 34, CL3: 34, CL1: 34
Sampling Rate	44.1kHz, 48kHz, 88.2kHz, 96kHz
Connectivity	Dante, USB
Recallable Scenes	Yes
Expandability	Yes