To Next PageTo Next PageWhy have the preset station settings been cleared on my Yamaha Car Receiver?
If the preset station settings on your Yamaha Car Receiver have been cleared, it may be because the unit lost power for more than a week. Plug the power cable into the outlet firmly, and preset the stations again.
Why has the clock setting been cleared on my Yamaha Car Receiver?
If the clock setting on your Yamaha Car Receiver has been cleared, it's likely the unit lost power for more than 4 minutes. Ensure the power cable is firmly plugged into the outlet, and then set the clock again.
Why doesn't the auto tuning function work on my Yamaha Car Receiver?
If the auto tuning function isn't working on your Yamaha Car Receiver, it could be due to improper connection of the AM loop antenna. Make sure the AM loop antenna is properly connected. Alternatively, the radio station you're trying to tune to might be too far away, or the radio wave reception in your area might be weak. In this case, try manual tuning to improve the signal quality.
Why doesn't playback start immediately on my Yamaha Car Receiver?
If playback doesn't start immediately after pressing 'h' on your Yamaha Car Receiver, it could be due to several reasons. First, ensure the disc is properly placed in the disc tray. The disc may be dirty, so try wiping it clean. Also, make sure the disc is compatible with the unit. Finally, if the unit was moved from a cold to a warm place, condensation might have formed on the disc reading lens; wait an hour or two and try again.
How to stop my Yamaha Car Receiver from picking up noises from other equipment?
If your Yamaha Car Receiver is picking up noises from digital or high-frequency equipment, it might be placed too close to that equipment. Try moving the unit away from the source of the interference.
General| Brand | Yamaha |
|---|---|
| Model | CRX-E320 |
| Category | Stereo System |
| Language | English |
Overview of the front panel controls and their functions for the unit.
Explanation of the symbols and indicators on the unit's display screen.
Details on the common functions and operation of the remote control.
Operations available when the CD or USB mode is selected on the unit.
Operations available when the TUNER mode is selected for radio reception.
Instructions for installing batteries and operating the remote control effectively.
Procedure for connecting left and right speakers to the unit properly.
Optional connection guide for a subwoofer to the unit's SUBWOOFER OUT jack.
Instructions for connecting AM loop and FM indoor antennas for radio reception.
Guide to connecting CD/MD recorders and other external devices for recording or playback.
Steps to connect a USB device for playing MP3 or WMA files.
Guide to connecting portable audio players and headphones to the unit.
Procedure for connecting the power cable and how to turn the unit on and off.
Step-by-step guide to setting the unit's internal clock time.
How to select input sources, adjust volume, and mute the sound on the unit.
Starting, stopping, and pausing playback for audio CDs and USB devices.
Searching, skipping tracks, and selecting files/folders for playback.
Switching the playback information displayed on the front panel during playback.
Details on playback information for MP3 or WMA files on discs/USB.
Using repeat and random playback modes for discs and USB devices.
Customizing playback order with programmed playback (PROGRAM).
Performing index search for audio CDs with index numbers.
Switching frequency steps and tuning radio stations automatically or manually.
Automatically or manually presetting radio stations for quick access.
Selecting and editing preset radio stations and their names.
Receiving Radio Data System stations and selecting by program type.
Switching the display information for Radio Data System broadcasts.
Programming the unit to play a source automatically at a specified time.
Setting the unit to automatically turn to standby mode after a specified interval.
Adjusting display brightness and switching information displayed on the front panel.
Playing sound from portable audio devices and other external components.
Guidance on recording audio from the unit to an external recorder.
Customizing sound settings like bass, treble, and speaker balance.
General troubleshooting steps for common problems with the unit.
Troubleshooting specific issues related to the remote control and disc playback.
Troubleshooting radio reception issues for FM and AM bands.
Important information and handling instructions for various types of discs.
Definitions of technical terms and audio formats used in the manual.
Technical details and performance specifications of the unit.
