65
English
Note
If a key which has a preset function learns a new function, the
preset function will not be deleted, but disabled. When the
learned function is cleared, the preset function is restored. (For
information on clearing a learned function, refer to page 72.)
About the marks shown on the remote control
transmitter
The marks on the remote control transmitter signify functions of
keys, input sources, etc.
Examples)
(tape): Tape deck, VCR, etc.
(disc): CD player, LD player, etc.
(radio wave): Tuner, TV/BS tuner, etc.
These marks are helpful for storing new functions.
Examples)
• The area B of keys 1 is suitable for storing functions to
control your VCR.
• The area B of keys 3 is suitable for storing functions to
control your TV/BS tuner.
About the lighting of keys
When you press an input selector key, it lights up for about 3
seconds.
When an input selector key in the group of selected memory
area (A, B or C) is pressed, the mark of key group (
1–3)
which is the same as the mark of the selected input selector
key lights up for about 3 seconds.
Example)
Conversely, when a key of group
1–3 is pressed, its mark
and the input selector key with the same mark in the group of
the selected memory area light up for about 3 seconds.
This feature may be helpful for you if you store functions for
controlling an input source to a group of keys whose mark
lights up when the corresponding input selector key is pressed.
To Next Page
Loading...
Need help?
General
