19
English
ADJUSTMENT METHOD
Adjustments should be made while watching the information on this unit’s display.
When adjusting with the remote control, set the
SELECTOR DIAL to the AMP/TUN or DSP position on the
remote control.
or
1 Turn the power on.
Front panel Remote control
or
2 Press SET MENU once or more to select the function
“CNTR” on the display.
Front panel Remote control
or
* After pressing SET MENU once on the remote control, you
can also select the function by pressing
. (Pressing
goes back one selection.)
1
2
3
1 23
3 Press + or – once or more to select the setting you
want.
Front panel Remote control
or
4 Repeat steps 2 and 3 to change the settings for
“REAR”, “MAIN”, “BASS” and/or “M.LVL” in the same
way.
01DSP-A595a-2 6/24/99, 12:15 PM19
To Next Page
Loading...
Need help?
General
