Yamaha F175A - Specifications and Requirements; Engine and Power Unit Specifications

Specifications and requirements
10
EMU40501
Specifications
TIP:
“(SUS)” indicates that the specification is for
the outboard motor when it is equipped with
a stainless steel propeller.
EMU2821V
Dimension and weight:
Overall length:
920 mm (36.2 in)
Overall width:
548 mm (21.6 in)
Overall height L:
F175AET 1742 mm (68.6 in)
F200FET 1742 mm (68.6 in)
F200FET1 1742 mm (68.6 in)
Overall height X:
1869 mm (73.6 in)
Motor transom height L:
F175AET 516 mm (20.3 in)
F200FET 516 mm (20.3 in)
F200FET1 516 mm (20.3 in)
Motor transom height X:
643 mm (25.3 in)
Dry weight (SUS) L:
F175AET 224 kg (494 lb)
F200FET 226 kg (498 lb)
F200FET1 226 kg (498 lb)
Dry weight (SUS) X:
F175AET 225 kg (496 lb)
F200FET 227 kg (500 lb)
F200FET1 227 kg (500 lb)
FL200FET 227 kg (500 lb)
FL200FET1 227 kg (500 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
F175AET 128.7 kW (175 HP)
F200FET 147.1 kW (200 HP)
F200FET1 147.1 kW (200 HP)
FL200FET 147.1 kW (200 HP)
FL200FET1 147.1 kW (200 HP)
Idle speed (in neutral):
650–750 r/min
Power unit:
Type:
4-stroke DOHC L4 16 valves
Total displacement:
2785 cm³ (169.9 c.i.)
Bore × stroke:
96.0 × 96.2 mm (3.78 × 3.79 in)
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Steering system:
Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Battery rating (CCA/EN):
640–1080 A
Battery rating (20HR/IEC):
80 Ah
Maximum generator output:
50 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
U6DA72E0.book Page 10 Monday, December 22, 2014 11:13 AM