Instruments and indicators
40
ECM01593
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36151
Water separator alert
This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 93 of this manual
to drain the water from the fuel filter. Get back
to the port soon and consult a Yamaha dealer
immediately.
ECM00911
Gasoline mixed with water could cause
damage to the engine.
EMU36161
Engine trouble alert
This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ECM00921
In such an event, the engine will not oper-
ate properly. Consult a Yamaha dealer im-
mediately.
EMU36171
Low battery voltage-alert
If the battery voltage drops, the low battery
voltage-alert indicator and the battery voltage
value will start to blink. Get back to the port
U6DA72E0.book Page 40 Monday, December 22, 2014 11:13 AM
To Next Page
Loading...
