Trouble Recovery
102
3. Prepare the engine for starting. For fur-
ther information, see page 55. Be sure
the engine is in neutral and that the clip
is attached to the engine shut-off switch.
4. Turn on the main switch.
5. Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope around the fly-
wheel several turns clockwise.
6. Give a strong pull straight out to crank
the engine. Repeat if necessary.
WARNING! Do not install the top
cowling when engine is running.
[EWM00621]
The engine can be started only when the
Yamaha Security System is in the unlock
mode.
EMU33501
Treatment of submerged motor
If the outboard motor is submerged, immedi-
6C1-9-79-1E0.book 102 ページ ２０１１年３月１７日 木曜日 午後２時５４分
To Next Page
Loading...
