Yamaha F8C - Specifications and Requirements; Specifications

Specifications and requirements
10
EMU38092
Specifications
TIP:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
EMU2821U
Dimension and weight:
Overall length:
F8CMH 927 mm (36.5 in)
FT8DE 552 mm (21.7 in)
FT8DEP 552 mm (21.7 in)
FT8DMH 1038 mm (40.9 in)
Overall width:
F8CMH 375 mm (14.8 in)
FT8DE 331 mm (13.0 in)
FT8DEP 331 mm (13.0 in)
FT8DMH 358 mm (14.1 in)
Overall height S:
F8CMH 998 mm (39.3 in)
Overall height L:
F8CMH 1125 mm (44.3 in)
FT8DE 1186 mm (46.7 in)
FT8DEP 1186 mm (46.7 in)
FT8DMH 1186 mm (46.7 in)
Overall height X:
FT8DE 1255 mm (49.4 in)
FT8DMH 1255 mm (49.4 in)
Motor transom height S:
F8CMH 435 mm (17.1 in)
Motor transom height L:
F8CMH 562 mm (22.1 in)
FT8DE 557 mm (21.9 in)
FT8DEP 557 mm (21.9 in)
FT8DMH 557 mm (21.9 in)
Motor transom height X:
FT8DE 625 mm (24.6 in)
FT8DMH 625 mm (24.6 in)
Dry weight (AL) S:
F8CMH 38 kg (84 lb)
Dry weight (AL) L:
F8CMH 39 kg (86 lb)
FT8DE 45 kg (99 lb)
FT8DEP 50 kg (110 lb)
FT8DMH 45 kg (99 lb)
Dry weight (AL) X:
FT8DE 46 kg (101 lb)
FT8DMH 46 kg (101 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
5.9 kW (8 HP)
Idle speed (in neutral):
1000–1100 r/min
Power unit:
Type:
4-stroke SOHC L2 4 valves
Total displacement:
197 cm³ (12.0 c.i.)
Bore × stroke:
56.0 × 40.0 mm (2.20 × 1.57 in)
Ignition system:
CDI
Spark plug (NGK):
BR6HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Steering system:
F8CMH Tiller handle
FT8DE Remote steering
FT8DEP Remote steering
FT8DMH Tiller handle
Starting system:
F8CMH Manual starter
FT8DE Electric starter
FT8DEP Electric starter
FT8DMH Manual starter
Starting carburetion system:
Choke valve
U60R79E0.book Page 10 Wednesday, December 18, 2013 1:32 PM