Front & Rear Panels
MW10 Owner's Manual
19
English
Rear Section
1 AC ADAPTOR IN Connector
Connects to the included PA-10 power adaptor (see
page 6).
Use only the PA-10 adaptor included with this
mixer. Use of a different adaptor may result in fire
or electric shock.
2 POWER Switch
Use this switch to set mixer power to ON or STANDBY.
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not
plan to use the mixer again for a long while, be sure
to unplug the adaptor from the wall outlet.
3 USB Connector
Connects to the computer via the supplied USB cable.
When connecting or disconnecting the USB cable
be sure to turn the 2TR IN/USB control all the way
down.
1 2 3
To Next Page
Loading...
Need help?
General
