Yamaha MW10 User Manual

Appendix
MW10 Owner's Manual
24
■ Analog Input Specifications
Where 0 dBu=0.775 Vrms and 0 dBV=1 Vrms
* Input sensitivity: the lowest level that will produce an output of +4 dBu (1.23V) or the nominal output level when the unit is set to maximum gain.
(All level controls are maximum position.)
■ Analog Output Specifications
Where 0 dBu=0.775 Vrms and 0 dBV=1 Vrms
■ Digital Input/Output Specifications
Input Connector Gain
Input
Impedance
Appropriate
Impedance
Sensitivity*
Nominal
Level
Max. Before
Clipping
Connector
Specifications
MIC INPUT
(CH 1, 2)
–60
3 k ohms 50–600 ohms mic
–72 dBu
(0.195 mV)
–60 dBu
(0.775 mV)
–40 dBu
(7.75 mV)
XLR-3-31 type (bal-
anced)
–16
–28 dBu
(30.8 mV)
–16 dBu
(123 mV)
+4 dBu
(1.23 V)
LINE INPUT
(CH 1, 2)
–34
10 k ohms 600 ohms line
–46 dBu
(3.88 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
Phone jack (TRS)
(balanced [T: hot; R:
cold;
S: ground])
+10
–2 dBu
(0.615 V)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH MIC INPUT
(CH3(L)/CH4(R),
CH5(L)/CH6(R))
–60
3 k ohms 50–600 ohms mic
–72 dBu
(0.195 mV)
–60 dBu
(0.775 mV)
–40 dBu
(7.75 mV)
XLR-3-31 type (bal-
anced)
–16
–28 dBu
(30.8 mV)
–16 dBu
(123 mV)
–10 dBu
(245 mV)
ST CH LINE INPUT
(CH3(L)/CH4(R),
CH5(L)/CH6(R))
–34
10 k ohms 600 ohms line
–46 dBu
(3.88 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
Phone jack (unbal-
anced)
+10
–2 dBu
(0.615 V)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH INPUT
(CH7(L)/CH8(R),
(CH9(L)/CH10(R))
10 k ohms 600 ohms line
–22 dBu
(61.5 mV)
–10 dBu
(245 mV)
+10 dBu
(2.45 V)
Phone jack (unbal-
anced);
RCA pin jack
CH INSERT IN
(CH 1, 2)
10 k ohms 600 ohms line
-12 dBu
(195 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack (TRS)
(unbalanced
[T: out; R: in;
S: ground])
RETURN (L, R)
10 k ohms 600 ohms line
–8 dBu
(308 mV)
+4 dBu
(1.23 V)
+24 dBu
(12.3 V)
Phone jack (unbal-
anced)
2TR IN (L, R)
10 k ohms 600 ohms line
–22 dBV
(79.4 mV)
–10 dBV
(316 mV)
+10 dBV
(3.16 V)
RCA pin jack
Output Connectors Output Impedance
Appropriate
Impedance
Nominal Level
Max. Before
Clipping
Connector Specifications
ST OUT (L, R)
150 ohms 10 k ohms line +4 dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (TRS)
(impedance balanced
[T: hot; R: cold; S: ground])
AUX SEND (1, 2)
150 ohms 10 k ohms line +4 dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (TRS)
(impedance balanced
[T: hot; R: cold; S: ground])
CH INSERT OUT
(CH 1, 2)
150 ohms 10 k ohms line 0 dBu (0.775 V) +20 dBu (7.75 V)
Phone jack (TRS)
(unbalanced [T: out; R: in;
S: ground])
REC OUT (L, R)
600 ohms 10 k ohms line –10 dBV (316 mV) +10 dBV (3.16 V) RCA pin jack
C-R OUT (L, R)
150 ohms 10 k ohms line +4 dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (TRS)
(impedance balanced
[T: hot; R: cold; S: ground])
PHONES
100 ohms 40 ohms phone 3 mW 75 mW Stereo phone jack
Connector Format Data Length Connector Specification
USB USB Audio 1.1 16 bit USB B type
English Deutsch Français Español

Yamaha MW10 Specifications

General

Brand	Yamaha
Model	MW10
Category	Music Mixer
Language	English