Yamaha MX400 - Input Specifications

Input Specifications 15
MX400 User’s Guide
* 0dB=0.775V R.M.S
Input Specifications
*1. Sensitivity is the lowest input level that will produce an output of +4dB (1.23V) or the nominal output level when MX400 is set to
maximum gain (i.e. all level controls and faders set to maximum).
*2. XLR-type connectors and phone jacks (TRS) are balanced (Tip=HOT, Ring=COLD, Sleeve=shield).
*3. Insert phone jacks (TRS) are unbalanced (Tip=out, Ring=in, Sleeve=GND).
*4. Phone jacks are unbalanced.
*5. The talkback jack is unbalanced.
*6. In these specifications, when dB represents a specific voltage, 0dB is referenced to 775mV RMS,and when dBV represents a specific
voltage, 0dBV is referenced to 1V RMS.
Power requirements
US&Canada model
120V AC, 60Hz
General model
230V AC, 50Hz
Weight
MX400-8 17kg, MX400-12 19kg, MX400-16 22kg, MX400-24 28kg
Power Consumption
80W
Dimensions (W × H × D)
MX400-8 562×180.2×596mm
MX400-12 682×180.2×596mm
MX400-16 802×180.2×596mm
MX400-24 1042×180.2×596mm
Input Connection
PAD
Switch
GAIN
Control
Actual Load
Impedance
For Use with
Nominal
Input level
Mixer
Connector
Sensitivity *1 Nominal
Max. Before
Clip
INPUT A/B
— –60
4k Ω
50–600 Ω mics
&
600 Ω lines
–80dB
(77.5µV)
–60dB
(775µV)
–40dB
(7.75mV)
XLR-3-31 type
(A),
Phone jack (B)
*2
— –16
–36dB
(12.3mV)
–16dB
(123mV)
+4dB
(1.23V)
–20 –16
–16dB
(123mV)
+4dB
(1.23V)
+24dB
(12.3V)
STEREO INPUT 1, 2
+4 —
5k Ω 600 Ω lines
–12dB
(195mV)
+4dB
(1.23V)
+24dB
(12.3V)
Phone jack *4
RCA
(switchable)
–10 —
–26dB
(38.8mV)
–10dB
(245mV)
+10dB
(2.45V)
STEREO INPUT 3, 4
+4 —
5k Ω 600 Ω lines
–12dB
(195mV)
+4dB
(1.23V)
+24dB
(12.3V)
Phone jack *4
–10 —
–26dB
(38.8mV)
–10dB
(245mV)
+10dB
(2.45V)
INPUT INSERT IN 10k Ω 600 Ω lines
–20dB
(77.5mV)
0dB
(775mV)
+20dB
(7.75V)
Phone jack
(TRS) *3
STEREO INSERT IN 10k Ω 600 Ω lines
–20dB
(77.5mV)
0dB
(775mV)
+20dB
(7.75V)
Phone jack
(TRS) *3
GROUP INSERT IN 10k Ω 600 Ω lines
–20dB
(77.5mV)
0dB
(775mV)
+20dB
(7.75V)
Phone jack
(TRS) *3
TAPE IN 10k Ω 600 Ω lines
–26dBV
(50mV)
–10dBV
(316mV)
— RCA
STEREO SUB IN 10k Ω 600 Ω lines
–6dB
(388mV)
+4dB
(1.23V)
+24dB
(12.3V)
Phone jack *4
GROUP SUB IN 10k Ω 600 Ω lines
–6dB
(388mV)
+4dB
(1.23V)
+24dB
(12.3V)
Phone jack *4
2TR IN 10k Ω 600 Ω lines
–20dBV
(100mV)
–10dBV
(316mV)
+10dBV
(3.16V)
RCA
TALKBACK 10k Ω 50~600 Ω mics
–66dB
(388µV)
–50dB
(2.45mV)
–30dB
(24.5mV)
XLR-3-31 type
*5