Yamaha RAPTOR YFM125RA User Manual

FRONT WHEEL
4-7
EAS21890
REMOVING THE FRONT WHEELS
The following procedure applies to both of the
front wheels.
1. Place the vehicle on a level surface.
WARNING
EWA13120
Securely support the vehicle so that there
is no danger of it falling over.
TIP
Place the vehicle on a suitable stand so that
the front wheel is elevated.
2. Remove:
• Front wheel
EAS29380
CHECKING THE FRONT WHEELS
The following procedure applies to both of the
front wheels.
1. Check:
•Tire
• Wheel
Refer to “CHECKING THE TIRES” on
page 3-15 and “CHECKING THE
WHEELS” on page 3-15.
2. Measure:
• Radial wheel runout “1”
• Lateral wheel runout “2”
Over the specified limit → Replace the
wheel or check the wheel bearing play
“3”.
3. Check:
• Wheel balance
Out of balance → Adjust.
WARNING
EWA15000
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in vehicle damage and possible
injury.
EAS29390
CHECKING THE FRONT WHEEL HUBS
The following procedure applies to both of the
front wheel hubs.
1. Check:
• Wheel hub “1”
Cracks/damage → Replace.
Radial wheel runout limit
2.0 mm (0.08 in)
Lateral wheel runout limit
2.0 mm (0.08 in)

Yamaha RAPTOR YFM125RA Specifications

General

Brand	Yamaha
Model	RAPTOR YFM125RA
Category	Offroad Vehicle
Language	English