Yamaha RM1x - Page 70

70 RM1x SEQUENCE REMIXER
PATTERN MODE
❏ Variation Edit
page1
When variation connection = System: When variation connection = Insertion:
9. Effect
Parameter Values Function
(Refer to the separate List Book. ) Refer to the separate List Book for a complete listing of the RM1x
effect parameters.
(Available parameters
vary according to the
type.)
page2
When variation connection = System: When variation connection = Insertion:
Parameter Values Function
(Refer to the separate List Book. ) Refer to the separate List Book for a complete listing of the RM1x
effect parameters.
Send Variation to Chorus 000 ... 127 Sets level on bus from variation effect block to chorus block.
Setting appears only if variation type is set to System.
Dry/wet balance D63>W ... D=W ... D<W63 Sets balance between wet sound (sound passed through variation
effect) and dry (non-effected) sound.
Setting appears only if variation type is set to Insertion.
Send Variation to Reverb 000 ... 127 Sets level on bus from variation effect block to reverb block.
Setting appears only if variation type is set to System.
Variation Pan L63 ... C ... R63 Sets stereo positioning of signal from variation effect block.
Setting appears only if variation type is set to System.
(Available parameters vary
according to the type.)
* For information about how to change values, refer to the Basic Operation (page26).
* For information about how to change values, refer to the Basic Operation (page26).