Do you have a question about the Yamaha RX-V6ABL and is the answer not in the manual?
Type | AV Receiver |
---|---|
Channels | 7.2 |
Amplifier | Discrete |
HDMI Inputs | 7 |
HDMI eARC | Yes |
HDMI CEC | Yes |
Digital Audio Input/Output: Coaxial | 1 |
Analog Audio Input/Output | 4/1 |
Phono Input | Yes |
Subwoofer Output | 2 |
FM/AM Tuner | Yes |
Wireless Connectivity | Wi-Fi, Bluetooth |
Weight | 8.8 kg |
Rated Output Power (20Hz-20kHz, 2ch driven) | 80 W |
Frequency Response | 10 Hz-100 kHz |
Total Harmonic Distortion | 0.06% |
Input Sensitivity/Impedance | 200 mV/47 kΩ |
HDMI Input/Output | HDMI 2.1 |
HDMI Outputs | 2 |
USB Input | 1 |
Digital Audio Input/Output: Optical | 2 |
Wi-Fi | Yes |
Bluetooth | Yes |
Signal-to-Noise Ratio | 110 dB (CD, 250 mV) |
Speaker Impedance | 6–16 ohms |
Dimensions (W x H x D) | 435 x 171 x 377 mm |
Explanation of the YPAO function for automatic speaker setup.
Recommended speaker layouts for various channel systems.
Specifies the requirements for speakers and subwoofers to be connected.
Step-by-step instructions for connecting speakers to the unit.
Setting up wireless surround speakers and subwoofers.
Steps for adjusting speaker settings using YPAO.
Overview of enjoying various sound field effects and modes.
Information on enjoying Dolby Atmos and DTS:X content.
General steps for playing back video and music.
Connecting speakers for zone output using internal or external amplifiers.
Basic operation and items within the Option menu.
Basic operation and listing of items in the Setup menu.
Information on firmware updates via network or USB.
Procedure for updating firmware using a network connection.
Procedure for updating firmware using a USB flash drive.
General checks to perform when the unit does not function properly.
Troubleshooting for power, system, or remote control issues.
Solutions for common audio issues like no sound or distorted sound.
Troubleshooting steps for video display problems.
Solutions for Bluetooth connection and playback issues.
Explanation of error messages displayed on the unit's front display.
Lists default settings for Option, Setup, and Front Display menus.