I-9
MX80: DKC5R
The DKC5R is a thin control box which includes a volume-control slide switch. It is usually placed on the top
board. The dimensions are: 435(W)
×
47(H)
×
192(D) [mm]. The controller’s rear panel includes MIDI IN and
MIDI OUT jacks.
MarkII Series: DKC100R
The DKC100R controller includes a rotary encoder. On upright models, the controller is built into the front of the
top board. On grand pianos, it can be installed as a control box suspended from the keybed. The dimensions are:
435(W)
×
68(H)
×
217(D) [mm]. The controller’s rear panel includes MIDI IN and MIDI OUT jacks.
Control Box Front Panel
Control Box Rear Panel
Control Box Front Panel
Control Box Rear Panel