NAMES OF PARTS AND THEIR FUNCTIONS
3 En
■ Rear panel
A grille is attached to this product to protect the speakers.
• Since the grille cloth is made of soft material, it can be easily damaged, so do not scratch it with a sharp object.
• Do not overstress the grille cloth. If it is overstressed, it will become contorted and damaged. This may cause damage to
the speakers. Be careful when handling the grille cloth.
Connecting the DAB/FM antenna
A Connect the supplied antenna to the
unit.
B Pin the antenna where the best
reception is obtained.
• The supplied antenna is for receiving DAB/FM.
• Be sure to stretch out the antenna as the illustration shows.
• If DAB/FM reception is poor, change the height or
direction of the antenna, or relocate the unit.
If you listen to a DAB/FM radio station while USB
charging, noise may interfere with the radio reception. In
this case, disconnect the USB cable from the unit.
Caution
L CHARGING
Supplies 5 V/
1 A to a
portable device,
such as a
smartphone,
when it is
connected with
a USB cable
(☞ page 13).
M 12 V
Connect the
supplied AC
adaptor.
N AUX
Connect external devices
with ø3.5mm stereo mini
plug cables (☞ page 13).
O FM ANT
DAB/FM
antenna
terminal
To AC wall outlet
P Alarm switch
(☞ page 4)
A
B
Note
Caution
To Next Page
Loading...
Need help?
General
