BASIC FUNCTIONS
5 En
■ Switching the alarm on/off
At the set time, alarm sound plays back.
■ Stopping the alarm
The system automatically enters standby mode under the following circumstance.
• If no operation is performed for more than 8 hours while music is being played back or stopped.
• If more than 20 minutes have passed while all the 3 conditions (below) are met.
– Bluetooth is selected as a playback source.
– Bluetooth connection not established
– No operation
■ Activating/Deactivating Auto Standby
Press and hold PRESET for 3 seconds during standby mode. Auto Standby will alternately turn on and off.
The information will appear for several seconds on the clock display.
• Activate: ON (default setting)
• Deactivate: OFF
You can switch the alarm to ON or OFF
with the alarm switch.
When the alarm is on, the alarm indicator ( )
lights.
Operations during playing back alarm sound
Press .
y
• Unless you stop the alarm, the alarm stops after
60 minutes automatically.
• If you press any button except while the alarm is
activating, the alarm sound will stop for about 5 minutes
(snooze function).
Auto Standby
To Next Page
Loading...
Need help?
General
