88.35 MHz
Volume 25
2 En
■ Top panel
NAMES OF PARTS AND THEIR FUNCTIONS
B Clock display
C Indicators
(Alarm): Lights when the alarm
function is on (☞ page 4).
RADIO: Lights when the radio is selected
as an input source (☞ page 6).
AUX: Lights when AUX is selected as an
input source (☞ page 13).
(Bluetooth): Lights when (Bluetooth)
is selected as an input
source or during Bluetooth
pairing/connection
(☞ page 10, 11).
K
Press to turn on the system or enter standby mode.
Eco Standby mode
• This can reduce power consumption. Press and hold for
more than 3 seconds to set the system to power saving mode.
All the indicators and displays turn off, and Bluetooth
operation, audio playback, input via buttons except are
disabled. To cancel Eco Standby mode, press .
• The alarm function is not available in Eco standby mode.
Auto Standby (☞ page 5)
• This unit has a function that automatically activates standby
mode. Since you do not have to turn on or off the system every
time, you can save energy.
y Dimmer function
When in standby mode, press DISPLAY
repeatedly to set the brightness of the
displays and indicators.
3 (brightest) 2 1 (darkest)
A Grille
(☞ page 3)
E VOLUME
Controls volume.
F DISPLAY
Switches the information display
(☞ page 8).
G OPTION (CLOCK)
• Sets the clock (☞ page 4).
• Sets options when DAB is
selected as a source
(☞ page 9).
H TUNING
• Changes DAB stations when
DAB is selected.
• Changes the radio frequency
when FM is selected.
I PRESET
Stores up to five favorite DAB/FM
radio stations (☞ page 6).
J SOURCE (PAIRING)
Selects an input source from
(Bluetooth), AUX, or RADIO.
D Information display
(☞ page 7)
To Next Page
Loading...
Need help?
General
