Yamaha TSX-B235D - User Manual

Questions and Answers

L
Leonard BrownSep 2, 2025
What to do if MP3/WMA file in the USB device does not play on my Yamaha TSX-B235D Stereo System?
- P
  Patrick MooreSep 2, 2025
  If an MP3/WMA file in the USB device isn't playing on your Yamaha Stereo System, the USB device might not be recognized. Ensure the USB device is connected to the USB port instead of the CHARGING port. Turn the unit off and reconnect the USB device. If the problem persists, the USB device may not be playable on the unit. It could also be that the USB device does not contain playable files. Use a USB device that contains playable files.
M
Megan EvansSep 13, 2025
Why is the front panel display on my Yamaha TSX-B235D dim?
- H
  hyoungSep 14, 2025
  If the front panel display on your Yamaha Stereo System is dim, it might be because the brightness setting is set to AUTO. Change the brightness setting to something other than AUTO. Also, make sure that the illumination sensor is not covered.
E
Erin HunterAug 31, 2025
Why does my Yamaha Stereo System sound suddenly turn off?
- B
  Brenda OwensSep 1, 2025
  The sound on your Yamaha Stereo System might suddenly turn off because the sleep timer is set. Turn the unit on and play the source again.
U
ucruzSep 16, 2025
What to do if clock flashes and the unit cannot be operated on Yamaha Stereo System?
- D
  Deborah FisherSep 16, 2025
  If the clock is flashing and the unit cannot be operated on your Yamaha Stereo System, the CLOCK switch is likely in the SET position, meaning the clock settings are in progress. Set the CLOCK switch to the ON or OFF position.
A
Aaron HolmesSep 15, 2025
Why doesn't the alarm sound on my Yamaha Stereo System?
- N
  Nicole KennedySep 15, 2025
  If the alarm doesn't sound on your Yamaha Stereo System, check that the CLOCK switch is in the ON position.
S
sscottSep 23, 2025
Why is radio wave reception still weak with an outdoor antenna on my Yamaha Stereo System?
- J
  James PerezSep 23, 2025
  Even with an outdoor antenna, weak radio wave reception and distorted sound on your Yamaha Stereo System may be due to multipath reflection or other radio interferences. Try changing the height, direction, or placement of the antenna.
R
Robert PhillipsAug 28, 2025
Why does my Yamaha TSX-B235D Stereo System turn off unexpectedly?
- L
  Linda JacksonAug 28, 2025
  Your Yamaha Stereo System might be turning off unexpectedly because the auto power standby function has activated. This unit will turn off when 20 minutes have passed without any operation after stopping playback from a USB device or CD, or if the unit has been on for 8 hours or more without any operation.
N
nweaverAug 27, 2025
How to fix cracked or distorted sound on Yamaha TSX-B235D?
- M
  Matthew WoodsAug 27, 2025
  To resolve cracked, distorted, or abnormal noise issues on your Yamaha Stereo System, adjust the volume using the VOLUME control, or adjust the Bass with the EQ. If you are using an external device, lower its volume.
C
Christina JohnsonAug 27, 2025
Why do my Yamaha TSX-B235D speakers make no sound?
- L
  laurenhansonAug 27, 2025
  Your Yamaha Stereo System speakers might not be producing sound because the volume is set too low or muted. Adjust the volume level to resolve this. Another reason could be that the incorrect source is selected, so ensure you've chosen the right one. Also, check if headphones are connected, as this will mute the speakers; remove them if they are. Finally, if you're using an external device, its volume might be too low, so increase the volume on that device.
W
walkerbobbyAug 26, 2025
What to do if no sound is produced during Yamaha TSX-B235D playback?
- M
  Madison RodriguezAug 26, 2025
  If you experience no sound or interrupted sound during playback on your Yamaha Stereo System, first ensure that the Bluetooth connection with the other component is active by performing Bluetooth connection operations again. Also, verify that the devices aren't too far apart, and move them closer if needed. Ensure that there are no devices emitting radio-frequency signals nearby. Check that the other component’s Bluetooth function is on and set to send audio signals to your Yamaha unit, and that the pairing setting is correctly set to this unit. Finally, verify that the volume on the other component isn't set to the minimum.