BASIC FUNCTIONS
5 En
■ Switching the alarm on/off
At the set time, alarm sound plays back. During playback, operations below are available.
■ Using the snooze function
■ Stopping the alarm
You can set the time until the system turns off automatically when the sleep function is set to on.
Press ALARM.
When the alarm is on, the alarm
indicator ( ) lights up and alarm
time is displayed for a while.
Operations during playing back alarm sound
Press SNOOZE/SLEEP.
The alarm sound stops and resumes
after 5 minutes.
y
•If SOURCE+BEEP is set as the alarm type,
you can press SNOOZE/SLEEP once to
stop the beep sound, and twice to stop the
audio source. Five minutes after the audio
source is stopped, it will start fading in again
and the beep sound will resume.
• When the snooze function is activated, alarm
indicator flashes.
Press ALARM or .
y
• Unless you stop the alarm, the alarm stops
after 60 minutes automatically.
• When you stop the alarm, the alarm time
setting, etc., is saved for convenient use next
time.
Sleep setting
Select the sleep time.
You can set 30, 60, 90 or 120 minutes.
When the sleep function is on, the
sleep indicator ( ) lights up.
y
To cancel the sleep function, press SNOOZE/
SLEEP.
Sleep indicator ( ) and front
panel display flash.
Press repeatedly.
To Next Page
Loading...
Need help?
General
