Name: Yamaha V star 1100
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

is still centered within the bearing, install the

axle partway through the hub and center the

spacer. Remove the axle and continue install

ing the bearing until it bottoms.

5. Reassemble the hub as described in this chapter.

FRONT WHEEL

Refer to Figure 15.

Removal

1. Securely support the motorcycle with the front

wheel off the ground.

2. Test the wheel bearings as follows:

a. Hold the wheel along its side (hands 180°

apart), and try to rock it back and forth. If

there is any play at the axle, the wheel bear

ings are worn or damaged.

b. Have an assistant apply the brake while you

rock the wheel again. On wheels with se

288 CHAPTER TEN

FRONT WHEEL

1. Front axle

2. Axle clamp bolt

3. Collar

4. Seal

5. Bearing

6. Front wheel

7. Distance collar

8. Hub plate

9. Brake disc bolt

Questions and Answers:

Need help?

Do you have a question about the Yamaha V star 1100 and is the answer not in the manual?

Yamaha V star 1100 Specifications

General