8-28
8
7. Place a container under the coolant res-
ervoir to collect the used coolant.
8. Remove the coolant reservoir cap.
9. Disconnect the coolant reservoir hose,
and then drain the coolant from the cool-
ant reservoir.
10. After draining the coolant, thoroughly
flush the cooling system with clean tap
water.
11. Install the coolant drain bolt and its new
gasket and then tighten the bolt to the
specified torque.
1. Coolant drain bolt
2. Gasket
1. Coolant reservoir cap
2. Coolant reservoir hose
UBN57AE0.book Page 28 Tuesday, November 24, 2015 1:42 PM
To Next Page
Loading...
