Yamaha YP250 Service Manual

7-29
FRONT FORK
CHAS
NOTE:
45 Nm (4.5 mkg)
23 Nm (2.3 mkg)
EB703050
FRONT FORK INSTALLATION
Reverse the “REMOVAL“ procedure.
Note the following points.
1. Install:
 Front fork
1
Temporary tighten the pinch bolts.
Pull up the inner tube until its end flushes the top
of the under bracket
2
, then temporarily tighten
the bolt (under bracket lower)
3
.
2. Tighten:
 Cap bolts
1
 Pinch bolts (under bracket upper/lower)

Yamaha YP250 Specifications

General

Fuel System	Fuel Injection
Ignition System	TCI
Transmission	V-Belt Automatic
Front Suspension	Telescopic Fork
Rear Suspension	Unit Swing
Front Tyre	120/70-14
Wheelbase	1, 540 mm
Ground Clearance	140 mm
Engine	Liquid-cooled, 4-stroke, SOHC, 4-valve
Front Brake	Hydraulic Single Disc
Rear Brake	Hydraulic Single Disc
Rear Tyre	140/