YCO-1127-12-08
PPC-300WP Operation Manual
Batch Weighing
Batch weighing displays the weight of several different combined items in succession. An example is
weighing each of the different ingredients in a pizza.
Caution
The total gross weight should never exceed the capacity of the scale. This can damage the load
cell.
1. Begin with nothing on the weighing platform, the display reading zero,
and the center of zero and stable indicators lit.
2. Place an empty container on the weighing platform and wait for the
stable indication.
3. Press the key. The weight of the container will be subtracted au-
tomatically, the net weight indicator will display, and the scale will read
zero.
4. Add the rst item to be weighed in the container until the desired
weight is reached.
5. Press the key to return to net zero. Add the second item to be
weighed in the container until the desired weight is reached.
6. Press the key to return to net zero. Continue adding items and
taring them off until all the desired items have been added to the con-
tainer. Press the key at any time to toggle between the total gross
weight and the current net weight.
7. Remove the container and all items from the weighing platform, wait
for the stable indication, and then press the key to reset the scale
to zero.
IV Using the Scale
11
To Next Page
