Yamato PPC-300WP - Page 28

YCO-1127-12-08
PPC-300WP Operation Manual
Display Condition Action
Overload - there is too much
weight on the scale platform.
Remove weight from the
scale platform until the
load is within the scale
capacity.
Negative weight reading
greater than ve divisions.
Replace the stainless
steel pan on the scale
platform, if removed.
Remove all items from the
scale platform and press
the key.
Sensor error. Turn the scale off, wait
one minute, and then turn
the scale back on.
Circuit error. Turn the scale off, wait
one minute, and then turn
the scale back on.
Controller error. Turn the scale off, wait
one minute, and then turn
the scale back on.
Additional troubleshooting steps require the services of a qualied scale technician. Do not attempt to
service the scale yourself.
VI Troubleshooting
25