Yamato UDS-1V-WP - Tare Operation

14
TARE OPERATION
Tare operation is used when you want to display the net weight that is deducted a container weight
from the total weight. (Tare means a container.)
Operation Display
1 Place an empty container on the pan.
The weight of the container (e.g. 25 g) is shown on the
display.
2
Press
after the stable indicator is lit.
The NET indicator is lit and the display shows zero.
3 Start of weighing
Place the item(s) in the container on the pan.
The display shows the net weight of the item (e.g. 150 g).
4 Cancellation of tare
Remove the container from the pan.
The display shows the weight of the container as a negative
number.
5
Press
.
The NET indicator goes out and the display shows zero.