7
INSTALLATION
How to set batteries
Note:
Carefully avoid excessive force on the scale when it is turned over.
A drop and/or excessive force may damage the scale.
1. Turn over the scale.
2. Wipe off the water or dust on the scale with a dry
cloth.
3. Turn the battery lid screw to open the
battery lid.
4. Remove the battery lid.
5. Wipe off the water or dust around the
battery box with a dry cloth.
6. Set batteries correctly according to the polarity
marks (+, -) shown inside the battery box.
Incorrect set may damage the scale.
7. Check the batteries are set firmly, or the
battery lid cannot be fully closed and its
waterproof cannot be kept.
To Next Page
Loading...
Need help?
General
