YAMAZAKI MAZAK INTEGREX e Series - Waiting Command

SUPPLEMENT 5
5-67
M. Waiting command
1. Command
Programming format
M950 to M997
Waiting Command (M-code)
P1 to P99999999
Waiting Command (P-code)
Function
Waiting commands are used to time the operation of the upper and lower turrets as
required. Two types of waiting command are provided: M-code and P-code, which can be
used freely and even mixedly.
2. Sample
 M-codes for waiting
Commands for upper turret
Commands for lower turret
G109L1
A
M950
B
M951
M997
C
M30
G109L2
M950
M951
<A>
M997
<B>
M30
Operation
M950

M951

M997

Upper
turret
A
B
C
Lower
turret
<A>
<B>

M950

M951

M997
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060