EasyManua.ls Logo

YASKAWA CIMR-F7A - Other; Do not attempt to modify or alter the Inverter

YASKAWA CIMR-F7A
478 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
vi
Other
Provide a separate holding brake if necessary.
Always make any adjustments other than those involving the operation of the Inverter with the holding brake released.
Failure to observe this caution may result in injury.
If using an Inverter with an elevator, take safety measures on the elevator to prevent the elevator
from dropping.
Failure to observe this caution can result in injury.
CAUTION
A CMOS IC is used in the control board. Handle the control board and CMOS IC carefully.
The CMOS IC can be destroyed by static electricity if touched directly.
Do not change the wiring, or remove connectors or the Digital Operator, during operation.
Doing so can result in personal injury.
WARNING
Do not attempt to modify or alter the Inverter.
Doing so can result in electrical shock or injury.
CAUTION
Do not subject the Inverter to halogen gases, such as fluorine, chlorine, bromine, and iodine, at any
time even during transportation or installation.
Otherwise, the Inverter can be damaged or interior parts burnt.
WARNING

Table of Contents

Related product manuals