Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of Printing
Rev.
No.
Section Revised Content
December 2000
−
− First edition
April 2001 Chapter 4 Addition: Precautions before Using Autotuning etc.
Chapter 6 Revision: Description of carrier frequency and inverter overload current level
May 2001 Addition: Index
April 2002 Chapter 10 Revision: Conformance to CE markings
Addition: Setting the power supply voltage jumper
7-8 and 9-4 page Revision: Description about detection level of over voltage and under voltage
August 2002 Back cover Revision: Address
March 2003 Revision: NEMA1
→
NEMA1 (Type1)
Chapter 4 Addition: LCD brightness adjustment (o1-05)
Chapter 6 Addition: Using Frequency Detection
August 2003 Chapter 4 Revision: Autotuning
September 2004 Addition: Information on Inverters with SPEC: E or later.
January 2005 Chapter 3 Addition:
y
DATA/ENTER Key is invalid when UV is detected.
y
Table 3.2 Relation of Inverter to RUN and STOP Indicators
Chapter 7 Revision: Note about GF in Table 7.1 Fault Displays and Processing.
Addition: Note about OC and GF in the Meaning column in Table 7.1 Fault Displays and Process-
ing.
MANUAL NO. TOE-S616-55.1
Printed in Japan April 2001 00-12
C
1
Date of
printing
Date of original
publication
Revision number
1
2
3
4
5
6
7
8
To Next Page
Loading...
Need help?
General