24
Peripheral
Devices Section 5
The following peripheral devices may be required to be mounted between the AC main circuit power supply and the Drive
input terminals L1 (R), L2 (S) and L3 (T).
Never connect a general LC/RC noise filter to the Drive output circuit.
Never connect a phase-advancing capacitor to the input/output sides or a surge
suppressor to the output side of the Drive.
When a magnetic contactor is installed between the Drive and the motor, never turn it
on or off during operation.
Note: For more details on peripheral devices, contact your manufacturer.
Recommended Branc
h Short Circuit Protection Peripheral Devices
All models have UL evaluated motor overload protection built in. Motor overload protection is also provided in accordance with
the NEC and CEC. Additional branch circuit overload protection is not required.
Model CIMR-V7* 20P1 20P2 20P4 20P7 21P5 22P2 23P7 25P5 27P5
MV A001 A002 A003 A005 A008 A011 A017 A025 A033
Capacity (kVA) 0.3 0.6 1.1 1.9 3.0 4.2 6.7 9.5 13.0
Rated output current (A) 0.8 1.6 3.0 5.0 8.0 11.0 17.5 25.0 33.0
Rated input current (A) 1.1 1.8 3.9 6.4 11.0 15.1 24.0 33.0 39.6
Max. Time Delay Fuse Rating (A)
(1)
1.8 3.2 6.25 10 17.5 20 25 45 60
Max. Non-Time Delay Fuse Rating (A)
(2)
351020 30 45 45 70 80
Max. MCCB Rating (A) 15 15 15 15 2
030 405060
230V 3-Phase
CAUTION
IG.V7.01_new format.qxd 4/18/05 1:21 PM Page 24
To Next Page
Loading...
