50
Monitor Displays Section 9
When using the Monitor Function, a variety of information will appear on the Digital Operator display when each of the U-XX
(display only) parameters is selected.
01 Frequency reference (Hz) 60.0
02 Output frequency (Hz) 60.0
03 Output current (A) 12.5
04 AC output voltage (V) 230
05 DC Bus voltage (VPN ) 325
06 Input terminal status
IIIIIIII
(1)
07 Output Terminal status IIIIIIII
(2)
08 Motor Torque (%) 72
(Open loop vector only)
09 Fault record (last 4 faults)
(3)
oC
10
Software number
0024
XXXX
11 Output Power (KW) 99.9
15 Data reception error IIIIIIII
(4)
16 PID Feedback (%) 35.0
17 PID Input (%) 100
18 PID Output (%) 75.5
PARAMETER DISPLAY
U - MONITORED ITEM EXAMPLE
IG.V7.01_new format.qxd 4/18/05 1:21 PM Page 50
To Next Page
Loading...
