3.2 Operations
3-49
9
head1
3
Utility Function Mode
3.2.21 Display of SERVOPACK and Servomotor ID (Fn01E)
This function displays ID information for SERVOPACK, servomotor, encoder, and
option module connected to the SERVOPACK. The ID information of some option
modules (SGDV-OFA01A, for example) is not stored in the SERVOPACK. “Not
available” will be displayed for these option modules.
The following items can be displayed.
∗ If the option module is not connected, “Not connect” will be displayed after the module
name.
(1) Preparation
There are no tasks that must be performed before the execution.
ID Items to be Displayed
SERVOPACK ID
• SERVOPACK model
• SERVOPACK serial number
• SERVOPACK manufacturing date
• SERVOPACK input voltage (V)
• Maximum applicable motor capacity (W)
• Maximum applicable motor rated current (Arms)
Servomotor ID
• Servomotor model
• Servomotor order number
• Servomotor manufacturing date
• Servomotor input voltage (V)
• Servomotor capacity (W)
• Servomotor rated current (Arms)
Encoder ID
• Encoder model
• Encoder serial number
• Encoder manufacturing date
• Encoder type/resolution
Safety Option Module ID
*
• Safety Option Module model
• Safety Option Module serial number
• Safety Option Module manufacturing date
• Safety Option Module ID number
Feedback Option Module
ID
*
• Feedback Option Module model
• Feedback Option Module serial number (Reserved area)
• Feedback Option Module manufacturing date
• Feedback Option Module ID
To Next Page
Loading...
Need help?
General
