2.2 Mechanical Installation
YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions 49
Table 2.9 Transportation Procedure 1 (Class: 4 kV)
Transportation Procedure
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.10
Figure 2.10 Inserting Wire Ropes for Lifting
2. Ensure that the hanging angle is no greater than 60°.
Front view
Top view
Wire ropes for lifting
Drive
Hanging angle of 60° max.
To Next Page
Loading...
