2.2 Mechanical Installation
YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions 43
◆ Transporting
The method of transport differs depending on the model of drive.
Transport the drive by using the appropriate method indicated in the table below.
Table 2.3 Models and Transportation Methods
Voltage
Class
(kV)
Nominal
Capacity
(kVA)
Motor Power
(HP)
Transportation Method
2
220 to 560 200 to 600
Use the support hooks on the top of the drive to lift the drive.
For details on the transportation procedure, refer to Table 2.4.
670 to 1620
700 to 1750
<1>
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.5.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.4.
1830 to 2500
2000 to 2750
<1>
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.5.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.4.
3
200 to 800 132 to 630
Use the support hooks on the top of the drive to lift the drive.
For details on the transportation procedure, refer to Table 2.6.
1150 to 2300 900 to 1800
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.7.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.6.
3000 to 3700 2500 to 3000
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.8.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.6.
4
375 to 900 400 to 1000
<1> The following models are under development.
2-kV class: 700 to 1750 HP, 2000 to 2750 HP
4-kV class: 1750 to 3000 HP, 3500 to 5000 HP
11-kV class: 5000 to 12000 kVA
Use the support hooks on the top of the drive to lift the drive.
For details on the transportation procedure, refer to Table 2.9.
1120 to 2700
1250 to 3000
<1>
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.10.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.9.
3170 to 4500
3500 to 5000
<1>
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.10.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.9.
6
400 to 2300 250 to 1800
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.12.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.11.
3000 to 7500 2500 to 6000
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.13.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.11.
11
660 to 3800 530 to 3050
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.15.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.14.
5000 to 12000
<1>
3960 to 9910
Use the support hooks to lift the transformer panel.
For details on the transportation procedure, refer to Table 2.15.
Use the support hooks on the top of the drive to lift the Power Cell and control panels.
For details on the transportation procedure, refer to Table 2.14.
To Next Page
Loading...
