8 YASKAWA ELECTRIC EZZ010926 FSDrive-MV1000 Instructions
i.1 Before Using the Product
i.1 Before Using the Product
This manual is designed to ensure correct and suitable application of FSDrive-MV1000-Series Drives. Read this manual
before attempting to install, wire, operate, maintain, or inspect a drive and keep it in a safe, convenient location for future
reference. Also be sure that you understand all the precautions and safety information before attempting to use the
product.
◆ Applicable Documentation
The following manuals are available for MV1000 series drives. Refer to the manual appropriate for your purpose.
◆ Symbols
The symbols used in this manual are explained below.
Note: Indicates important advice that must be followed. Also indicate low-level cautions that cause an alarm but do not involve a risk
of equipment damage, and supplementary notes.
◆ Terms and Abbreviations
◆ Trademarks
The companies and product names mentioned in this manual are trademarks or registered trademarks of those companies.
Super Energy-Saving Medium-Voltage AC Drive FSDrive-MV1000 Instruction Manual (this book)
Manual No.: EZZ010926
This manual contains basic information required to install and wire the drive, in addition to an overview of
operating procedures, fault diagnostics, and maintenance and inspection.
It covers the basic operation and trial running of this product.
Super Energy-Saving Medium-Voltage AC Drive FSDrive-MV1000 Parameter Guide
Manual No.: EZZ010930
This manual contains detailed information on parameter settings.
Use this manual to expand drive functionality and to take advantage of higher performance features.
Indicates a term or definition used in this manual.
• Drive, MV1000: Yaskawa FSDrive-MV1000 Series MV1000
• V/f: V/f Control
• OLV: Open Loop Vector Control
• CLV: Closed Loop Vector Control
• PM motor: Permanent Magnet Synchronous motor
To Next Page
Loading...
