YASKAWA GA800

4 Maintenance
44 YASKAWA TOEPC71061779D GA800 Drive Installation Manual
2. Align the notches on the fans with the pins on the drive and install the cooling fans in the drive.
A - Notch on fan
B - Alignment pins on drive
C - Front of drive
Figure 4.36 Install the Cooling Fans
3. Put the cables and connectors in the recess of the drive.
A - Front of drive B - Space for cables
*1
Figure 4.37 Put the Cables and Connectors in the Drive Recess
*1 Make sure that the cables and connectors are in the correct space.
4. Hold the fan finger guards at an angle and put the connector tabs on the fan finger guards into the holes on
the drive.
Note:
When you install the cooling fans, make sure that you do not pinch cables between the fan finger guards and the drive.