vii
166465-1CD
166465-1CD
Auto-Axcess DI/E Digital
Descriptions of the programming pendant, buttons, and displays are
shown as follows:
Description of the Operation Procedure
In the explanation of the operation procedure, the expression “Select • • •”
means that the cursor is moved to the object item and the SELECT key is
pressed, or that the item is directly selected by touching the screen.
Registered Trademark
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or bland names for each company or
corporation. The indications of (R) and TM are omitted.
Equipment Manual Designation
Programming
Pendant
Character Keys The keys which have characters
printed on them are denoted with
[ ].
ex. [ENTER]
Symbol Keys The keys which have a symbol
printed on them are not denoted
with [ ] but depicted with a small
picture.
ex. [page key]
The cursor key is an exception,
and a picture is not shown.
Axis Keys &
Number Keys
“Axis Keys” and “Number Keys” are
generic names for the keys for axis
operation and number input.
Keys pressed
simultaneously
When two keys are to be pressed
simultaneously, the keys are shown
with a “+” sign between them, ex.
[SHIFT]+[COORD]
Displays The menu displayed in the
programming pendant is denoted
with { }.
ex. {JOB}
To Next Page
Loading...
