8.2 Warning Displays
8.2.3 INDEXER Warning Displays and Troubleshooting
8-51
E64E
A.9F9
Control Method
Setting Error
An attempt was made to perform program
table operation, jog speed table operation,
or a homing operation when Pn000 =
n.1 was set to 3 to B.
Change the set-
ting of Pn000 =
n.X to a
value other than
1.
Continued from previous page.
Error No.
Alarm
Number
Error Name Meaning Corrective Action
To Next Page
Loading...
