YASKAWA SGM series

SERVO SELECTION AND DATA SHEETS
5.6.7 1CN Connector
326
5.6.7 1CN Connector
1) This connector is required to connect the host controller to 1CN on the Servopack.
• Connector
Pin #1
Pin # 19
2.54(0.10)
1.27(0.05)
2.3(0.09)
5.1(0.20)
1.27
(0.05)
(0.50)
(0.11)
(0.26)
(0.76)
(0.36)
(0.30)
Units: mm (inches)
Connector Type A B C
10136-3000VE 21.59 (0.85) 27.8 (1.09) 32.2 (1.27)
5