1 Preface and Safety
YASKAWA ELECTRIC SIEP C730600 89C YASKAWA AC Drive Option SI-EP3 Technical Manual 5
Terms
Registered Trademarks
• PROFINET is a registered trademark of PROFIBUS and PROFINET International (PI).
• Trademarks are the property of their respective owners.
Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option. Install the option according to this
manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal
injury or damage products and related equipment and systems.
Note: Indicates supplemental information that is not related to safety messages.
Option: YASKAWA AC Drive Option SI-EP3 PROFINET
Drive: • YASKAWA AC Drive 1000-Series (A1000, U1000, U1000L, Z1000U)
• YASKAWA AC Drive GA700
• YASKAWA AC Drive GA800
Keypad: • LCD Operator for YASKAWA AC Drive 1000-Series
• LED Operator for YASKAWA AC Drive 1000-Series
• LCD Keypad for YASKAWA AC Drive GA700 and GA800
• LED Keypad for YASKAWA AC Drive GA700 and GA800
V/f: V/f Control
CLV: Closed Loop Vector Control
OLV/PM: Open Loop Vector Control for PM
AOLV/PM: Advanced Open Loop Vector Control for PM
CLV/PM: Closed Loop Vector Control for PM
H: Indicates an engineering unit for hexadecimal number format.
Indicates a hazardous situation, which, if not avoided, will cause death or serious injury.
Indicates a hazardous situation, which, if not avoided, could cause death or serious injury.
Indicates a hazardous situation, which, if not avoided, could cause minor or moderate injury.
Indicates an equipment damage message.
To Next Page
Loading...
Need help?
General
