YASKAWA SI-EP3

6 Related Drive Parameters
YASKAWA ELECTRIC TOBP C730600 89D YASKAWA AC Drive Option SI-EP3 Installation Manual 37
F7-08
(03EC)
<11>
Subnet Mask 4
Sets the static/fixed Subnet Mask.
Parameter F7-08 sets the fourth most significant octet.
Default: 0
Min: 0
Max: 255
F7-09
(03ED)
<11>
Gateway Address 1
Sets the static/fixed Gateway address.
Parameter F7-09 sets the most significant octet.
Default: 192
Min: 0
Max: 255
F7-10
(03EE)
<11>
Gateway Address 2
Sets the static/fixed Gateway address.
Parameter F7-10 sets the second most significant octet.
Default: 168
Min: 0
Max: 255
F7-11
(03EF)
<11>
Gateway Address 3
Sets the static/fixed Gateway address.
Parameter F7-11 sets the third most significant octet.
Default: 1
Min: 0
Max: 255
F7-12
(03F0)
<11>
Gateway Address 4
Sets the static/fixed Gateway address.
Parameter F7-12 sets the fourth most significant octet.
Default: 1
Min: 0
Max: 255
F7-13
(03F1)
<11>
Address Mode at Startup
Selects how the option address is set.
0: Static <10>
2: DCP
Default: 2
Range: 0, 2
F7-14
(03F2)
Duplex Mode Selection
Selects duplex mode setting.
0: Half/Half
1: Auto/Auto
2: Full/Full
3: Half/Auto
4: Half/Full
5: Auto/Half
6: Auto/Full
7: Full/Half
8: Full/Auto
Default: 1
Range: 0 to 8
F7-15
(03F3)
<12>
Communication Speed
Selection
Sets the communication speed.
10: 10/10 Mbps
100: 100/100 Mbps
101: 10/100 Mbps
102 100/10 Mbps
Default: 10
Range: 10 to 102
F7-23
(03FB)
<13>
Dynamic Output Assembly
Parameter 1
Sets configurable output 1.
Default: 0H
Min.: 0H
Max.: FFFFH
F7-24
(03FC)
<13>
Dynamic Output Assembly
Parameter 2
Sets configurable output 2.
Default: 0H
Min.: 0H
Max.: FFFFH
No.
(Hex.)
Name Description Values
GEM_PROFINET_IM_E_conditional.book 37 ページ ２０１９年２月２１日 木曜日 午後３時３７分