8 Web Interface
YASKAWA ELECTRIC TOBP C730600 89D YASKAWA AC Drive Option SI-EP3 Installation Manual 53
n Procedure: Conditional Email Set-up
1.
Click the “Enable” check box to enable the alert.
2.
Define the condition that will trigger the email by selecting a monitor parameter, a
comparator, and a value. Set the conditions to send alerts from the “Condition”
drop-down selection. If choosing only one condition and no OR or AND are needed,
set the “OR/AND” drop-down selection to “---”.
3.
Enter the email address where the alert will be sent.
4.
Enter the message that will appear in the email contents.
5.
Enter the email subject.
Clicking “Save Email Settings” will save the entered information into the option.
GEM_PROFINET_IM_E_conditional.book 53 ページ ２０１９年２月２１日 木曜日 午後３時３７分
To Next Page
Loading...
