YASKAWA SIGMA 5 User Manual

iii
163475-1CD
163475-1CD
MHTH Postioner
SIGMA V
Notes for Safe Operation
Read this manual carefully before installation, operation, maintenance, or
inspection of the MHTH Positioner SIGMA V.
In this manual, the Notes for Safe Operation are classified as “WARNING,”
“CA
UTION,” “MANDATORY,” or “PROHIBITED.”
Even items described as “CAUTION” may result in a serious accident in
s
ome situations. At any rate, be sure to follow these important items.
WARNING
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury to
personnel.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury to
personnel and damage to equipment.
It may also be used to alert against
unsafe practices.
MANDATORY
Always be sure to follow explicitly the
items listed under this heading.
PROHIBITED
Must never be performed.
NOTE
To ensure safe and efficient operation at all times, be sure to
follow all instructions, even if not designated as "CAUTION"
and "WARNING."
3/28

YASKAWA SIGMA 5 Specifications

General

Type	Servo Amplifier
Rated Output Power	50 W to 15 kW
Humidity	90% RH or less (non-condensing)
Communication Interface	MECHATROLINK-II, MECHATROLINK-III, EtherCAT
Feedback	Incremental Encoder, Absolute Encoder
Series	SIGMA-5
Feedback Resolution	20-bit
Protection Functions	Overvoltage, Overcurrent, Overload
Ambient Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 85°C
Vibration Resistance	5.9 m/s² (0.6G)