YASKAWA U1000 - Receiving and Inspection; Model Number and Nameplate Check

i.2 Receiving
u
Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the drive does not function properly, contact your supplier.
u
Nameplate
n
Drive Models 2o0028 to 2o0248 and 4o0011 to 4o0590
F
E
D
B
A
C
G
H
I
PRG : 1010
IND.CONT.EQ.
7J48
CIMR-UU4A0011AUA
YASKAWA ELECTRIC CORPORATION
2-1 Kurosaki-shiroishi, Yahatanishi-Ku, Kitakyushu 806-0004 Japan
MADE IN JAPAN
:
: AC3PH 380-500V 50/60Hz 10A/8.7A
: AC3PH 0-475V 0-400Hz 11A/9.6A
: 20 kg
: 6W3050-2-100
: J0065F575310100
: E131457
PASS
MODEL
C / C :
CIMR-UU4A0011AUA
INPUT
OUTPUT
MASS
O / N
S / N
FILE NO
IP00
REV : A
A – Normal Duty amps / Heavy Duty
amps
B –
Software version
C –
Address
<1>
D – Enclosure type
E – Serial number
F – Lot number
G – Output specifications
H – Input specifications
I – AC drive model
Refer to Figure i.6 for details.
Figure i.3 Drive Nameplate Information Example
<1> The address of the head office of Yaskawa Electric Corporation (responsible for product liability) is shown on the nameplate.
i.2 Receiving
YASKAWA ELECTRIC TOEP C710636 04D U1000 Industrial MATRIX Drive Quick Start Guide
13