128
* 1. Upper limit of setting range and initial setting are doubled for 400 V
Class.
* 2. Depends on Inverter capacity. Refer to the next page.
* 3. Depends on Inverter capacity. Refer to page 65.
* 4. Initial setting of the model with Digital Operator (without potentiometer)
is 1. Setting can be set to 0 by constant initialization.
• 200 V Class 3-phase
• 200 V Class Single-phase
• 400 V Class 3-phase
No. Name Unit Initial Setting
- Inverter Capacity kW 0.1 0.2 0.4 0.75 1.5 2.2 - 3.7
n32 Motor Rated
Current
A 0.6 1.1 1.9 3.3 6.2 8.5 - 14.1
n64 Motor Rated Slip Hz 2.5 2.6 2.9 2.5 2.6 2.9 - 3.3
n65 Motor No-load
Current
%727362554535-32
No. Name Unit Initial Setting
- Inverter Capacity kW 0.1 0.2 0.4 0.75 1.5
n32 Motor Rated Current A 0.6 1.1 1.9 3.3 6.2
n64 Motor Rated Slip Hz 2.5 2.6 2.9 2.5 2.6
n65 Motor No-load Current % 72 73 62 55 45
No. Name Unit Initial Setting
- Inverter Capac-
ity
kW - 0.2 0.4 0.75 1.5 2.2 3.0 3.7
n32 Motor Rated
Current
A - 0.6 1.0 1.6 3.1 4.2 7.0 7.0
n64 Motor Rated
Slip
Hz - 2.5 2.7 2.6 2.5 3.0 3.2 3.2
n65 Motor No-load
Current
% - 73 63 52 45 35 33 33
To Next Page
Loading...
