October 2005 Chapter 5
Addition:・Table in the Description of
Status Indicators
・Flowchart in the Function
Indicator Description
Additional information for
when LOCAL/REMOTE
Selection and Constant
No./data are selected
Chapter 6
Addition:・Settings needed before
operation after wiring
・Setting 5 of Constant Se-
lection/Initialization (n01)
・*3 in the n081 Setting ta-
ble
・Settings 1, 9, 23 to 33 for
multi-function input selec-
tion
・Settings 8 and 9 for multi-
function output selection.
Chapter 8
Addition:・Descriptions of short cir-
cuit and grounding.
・Description of setting for
NPN/PNP switch.
・Description of short-circuit
bar.
Chapter 9
Revision:・Descriptions of recom-
mended magnetic contac-
tor in the Recommended
Peripheral Devices sec-
tion.
・A Change during Opera-
tion column has been in-
serted in the Constants
list.
Chapter 10 Added
Back cover Revision: Address
February 2006 Chapter 9
Revision:
Max. output voltage in the
Standard Specifications
(200 V Class)
Date of Printing
Rev.
No.
Section Revised Content
10
11
To Next Page
Loading...
